In the cold winter, installing an alcohol fireplace at home is a very warm thing, especially with the help of modern means and technological decorative materials to create a different atmosphere, which can produce a more gorgeous effect. Different surface materials will also produce different psychological effects. In a minimalist style space, the external material color of the alcohol fireplace cannot be dark, otherwise it will appear dull and dull. The fireplace will mainly form three layers of spatial relationships in the space, namely the distant view, the middle view and the near view. Its size can be considered in the initial layout of the entire room. Its installation matters also need to pay attention to the following aspects.
(1) Alcohol fireplace, as the name suggests, uses low-ignition-point and volatile alcohol as the main fuel. This requires that when it is used for the first time, a professional person needs to conduct an actual on-site survey and make a corresponding and reasonable fuel storage and fireplace installation plan after considering various factors.
(2) Personnel involved in installing alcohol fireplaces must have corresponding professional skills and theoretical foundations.
(3) The wall where the alcohol fireplace is installed and the area around the fireplace within 50-60 cm must be made of anti-burning and anti-high-heat materials
(4) Alcohol fireplaces are generally divided into table-top alcohol fireplaces and floor-standing alcohol fireplaces. Both need to be installed on a flat surface and away from places with heavy traffic in the space, especially away from children.
(5) The fire mouth of the alcohol fireplace cannot be exposed to strong winds, otherwise it will cause flame separation and cause danger.
Precautions for using alcohol fireplaces
(1) The fuel of the alcohol fireplace must be stored in a safe, cool and well-ventilated place
(2) The alcohol fireplace uses 95% bioethanol as the main fuel
(3) 95% biomass alcohol is: ethanol extracted from plants, which is harmless to the human body when burned
(4) The alcohol fireplace must be supervised during use to prevent children from getting scalded
(5) Do not place the alcohol fireplace in the main traffic area
Alcohol fireplace ignition process
(1) Pour alcohol into the combustion tank until it is 1-2 cm below the combustion mouth.
(2) If alcohol overflows during the injection process or there are traces of alcohol spillage on the outer surface of the fireplace combustion box in daily life, it is necessary to wipe it first before igniting the fire.
(3) Remember not to add alcohol to the alcohol fireplace while it is burning. Wait about 20 minutes after use before adding alcohol to avoid dangerous accidents.
(4) When using the ignition rod to ignite a manual alcohol fireplace, you should first ignite the ignition rod and place it in the combustion box to ignite it; automatic alcohol fireplaces can be controlled by remote control.
(5) When igniting with the ignition rod, a safe distance of about 20-30 cm should be maintained, because the alcohol fireplace may "explode".
Turning off the alcohol fireplace
(1) As the alcohol burns, the alcohol fireplace will eventually go out. The duration of the extinguishing will depend on the size of the combustion box, ranging from 1 hour to more than ten hours.
(2) If users of manual alcohol fireplaces need to turn off the combustion slot door during burning, they can use the ignition rod to turn it off; automatic alcohol fireplaces are controlled by remote control.
Other common problems and solutions
(1) What should I do if there is a flashover during ignition?
Solution
1. Confirm again that the alcohol added is 1-2 cm below the burner.
2. Confirm that the alcohol used is 95% biomass ethanol alcohol, which is harmless to the human body.
3. For users of manual alcohol fireplaces that use an ignition rod, you can blow gently on the combustion groove or fan lightly above the burner before ignition.
(2) The flame is not a pleasing yellow, but a bit light blue?
Solution:
Check whether the fuel used is 95% biomass ethanol alcohol.
(3) How to clean the outer surface of the alcohol fireplace?
Solution:
Just wipe it with a cloth with a rough surface and high friction.